Welcome to our comprehensive resource hub, dedicated to empowering gas utility professionals with the knowledge and tools needed to improve utility infrastructure. Dive into our expert guides, white papers, and video tutorials on Utility Solutions Group product configurations, smart gas solutions, and the future of gas metering. Whether you're looking to upgrade commercial, industrial, or residential utility systems, our resources are designed to guide you through every step of the process, ensuring efficient and innovative utility management.
Monitor + Worker Regulator Configurations for Gate Stations
- Article
How a monitor and worker regulator set protects a gate station: placement, set points, control lines, the 30% capacity cost, and the mistakes that make regulators fight. Continue Reading
Gate Station Regulator Sizing: From Pipeline Inlet to Distribution Outlet
- Article
Size a gate or district station regulator the right way: find true peak flow, size at minimum inlet pressure, verify at maximum, and apply droop, monitor, and growth margins. Continue Reading
Service Regulator Inlet Pressures: 2 PSI vs. 5 PSI vs. 60 PSI Selection Guide
- Article
What 2, 5, and 60 PSI inlet pressures mean for regulator and orifice selection on the USG 143: application, orifice limits, capacity, and relief protection.
Continue Reading
Residential Load Growth: When a 143 Regulator No Longer Fits
- Article
Generators, pool heaters, and tankless units push homes past their original regulator sizing. Learn the signs, how to confirm it, and when to move from a 143 to a 243. Continue Reading
Meter Set Assembly Best Practices: 143 & 496 Regulators
- Article
How to build a residential meter set around a USG 143 or 496 regulator: layout, venting, spring and orifice checks, serviceability, and the leak check crews skip.
Continue Reading
Cold-Weather Performance of Service Regulators: Freezing and Mitigation
- Article
Why gas regulator freezing happens: Joule-Thomson cooling, moisture, and ice at the orifice — plus the mitigation that works, from heaters to large-orifice regulators. Continue Reading
Replacing an Aging Service Regulator: Signs of End-of-Life in the Field
- Article
The field signs a service regulator needs replacing: leaks a rebuild won't fix, lost lock-up, outgrown capacity, and corrosion — plus when to rebuild vs. replace. Continue Reading
Service Regulator Install Checklist: From Meter Set to Commissioning
- Article
A sequenced service regulator install checklist, meter set to commissioning: pre-install checks, mechanical steps, vent termination, leak test, and lock-up verification.
Continue Reading
USG 496 Troubleshooting: Lock-Up Failure, Creep, and Vent Issues
- Article
Is your 496 not holding pressure? Work lock-up failure, creep, and vent problems by symptom — the 496-specific causes, fast field checks, and fixes.
Continue Reading
USG 143 Troubleshooting: The Most Common Field Failures and How to Fix Them
- Article
A symptom-first USG 143 troubleshooting guide: diagnose creep, lock-up failure, and vent problems at the meter set, with the fast field check for each.
Continue Reading